Construction: Multi-Lok Braid
Features: Unlike other PTFE fluocarbon filament packing, SEPCO pre-lubricates the yarns to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties.
Equipment: Any equipment where braided packing is commonly used.
Recommended For: The most severe services. All oxidizers and corrosives with one exception: molten alkali metals.
Limitations: Shaft speeds to 1202 FPM; pH range 0 - 14.
Remarks: No glazing at higher speed applications, inert, virtually indestructible  lower coefficient of friction, thermal resistance to 500°F/260°C; and high compression strength.

Construction: Multi-Lok Braid
Features: Pure PTFE filament lubricated with a proprietary lubricant that satisfies FDA requirements.
Equipment: Any equipment where braided packing is commonly used.
Recommended For: Applications in the food processing industry or where an FDA material is required.
Limitations: Shaft speeds to 1202 FPM; temperatures to 500°F/260°C; pH range 0 - 14.

Construction: Multi-Lok Braid
Features: A new improved PTFE yarn for high speed applications.
Equipment: Rotating pumps and agitators with peripheral shaft speeds too fast for other PTFE packing.
Recommended For: All chemicals and corrosives.
Limitations: Addition of new lubricants reduces the inertness slightly. Shaft speeds to 1885 FPM; temperatures to 500°F/260°C; pH range 0 - 14.
Remarks: Use this specially treated PTFE packing where other PTFE filament glazed or hardened because of frictional heat from high speeds and thermal expansion.

Construction: Multi-Lok Braid
Features: Style ML 2254 PTFE fibers are treated with a PTFE dispersion which fills and seals all interstices in the packing fibers. After braiding, a PTFE coating is applied and the packing is forced air dried. This packing will not wick.
Equipment: Valves, expansion joints and static applications.
Recommended For: All severe chemical and corrosive services where an inert packing is essential.
Limitations: Temperatures to 500°F/260°C; pH range 0 - 14. For static applications.
Remarks: Excellent valve stem packing for all chemicals and corrosives; inert to all fluids except molten alkali metals. 

Construction: Multi-Lok Braid
Features: PTFE fibers with PTFE suspensiod. Contains no organic lubricant and is approved for oxygen service.
Recommended For: All services where organic lubricants cannot be used.
Limitations: Temperatures to 550°F/260°C; pH range 0 - 14.